you can do that method, but it'd be a lot easier, especially if you're only using solder to use the method I linked to. And in the bios, you can program for 2d vs 3d clocks, so while in 2d mode, it'll bring down the freq.
you can do that method, but it'd be a lot easier, especially if you're only using solder to use the method I linked to. And in the bios, you can program for 2d vs 3d clocks, so while in 2d mode, it'll bring down the freq.
E8400 8x500=4000 | ABIT IP35-E
2x2GB Tracer PC2-6400 1:1 500MHz 5-5-5-15 2.0V
Galaxy 8800GT 800/2000/1100 1.3V | 80GB X25-M G2 + 1.5TB 7200.11 | XFiXG
Fuzion | MCW60 | DDC2+Petra | Coolrad22T+BIP1
Merom 13x133=1733 1MB L2 0.950V
Bookmarks