MMM
Results 1 to 10 of 10

Thread: OCTB Testing Fat Jack 1.0 vs 3.0 LN2

Threaded View

  1. #1
    Banned
    Join Date
    Aug 2007
    Posts
    1,014

    OCTB Testing Fat Jack 1.0 vs 3.0 LN2

    Blind_ripper,Massman,Beardyman

    Test Setup :
    QX6800
    DFI S-Dark/ ASUS P5K
    Crucial Ballistix PC6400
    OCZ 1KW
    Nvidia 6800GS
    Fatt Jack 1.0
    FatT Jack 3.0

    Fatt Jack 1.0 results
    4.9ghz at dfi s-dark 1.9V
    -validation-

    The bad and the good :
    Good for dryice rather unstable for LN2 seems to have problems with holding temps conus + stepper no key to succes

    Fatt Jack 3.0
    Note : we mounted the probe at the wall of the container
    4.5 ghz 1.65V bugged at dfi wall temp was around -100, core temp around -140
    Insulation my friends was PEACE OF CAKE

    The bad and the good
    We learned that the probe must be place in the center of the containers base in order to make sure of full temp control, surpassing the coldbug was not easy , it hold load tremendous well for sure with coke cola trick

    We switched to evo and p5K from vince then, since it had the probe mounted correctly in the center

    @-115°C and 1.59V we managed to push out 4765Mhz out of the chip giving a reasonable 10.8secs in superpi and sub 10 secs wprime. This QX has some serious potential!

    Some pics :
    will be posted by blind_ripper

    Last edited by BeardyMan; 08-19-2007 at 07:14 AM.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •