G.SKILL F2-9600CL5D-4GBPI Sample testing

[Sepander]

Does anyone know if its possible to find this kit in Europe?

Yep. http://www.preiscompany.de/ddr2-4096...i-p-21749.html

[ChaosAD]

Thanks a lot Sepander, i ll have a look at the site. I hope they will be able to send in Greece.

Btw i cant understand a thing on the site, and the price of 290 euro is more than crazy tbh.

[WaterFlex]

ROFL. 300 Euro is too much for DDR2.

[Sepander]

Btw i cant understand a thing on the site, and the price of 290 euro is more than crazy tbh.

I know man. They are very expensive but this kit usually is.

[ChaosAD]

I agree its an expensive kit. But 300 dollars in US does not translate in 300 euros. I was expecting to be in the range of 180-200 euros.

[Commander_HK47]

I like this memory a lot, i have replaced my transcend 1200 4x1 sticks with a set of theses. So far i have them running @ 1200 default speed with a performance level of 5. They run intel burn test stable kick ass!!!

[zsamz_]

I agree its an expensive kit. But 300 dollars in US does not translate in 300 euros. I was expecting to be in the range of 180-200 euros.

yes 300 euros is ridiculous
already 300$us is expensive

[WaterFlex]

I like this memory a lot, i have replaced my transcend 1200 4x1 sticks with a set of theses. So far i have them running @ 1200 default speed with a performance level of 5. They run intel burn test stable kick ass!!!

IntelBurnTest doesn`t stress RAM very much
You should use MemTest 3.8 to check the NB<-->RAM stability.

[zsamz_]

lossened up subtimings n set memory to nominal to see if p35 can pull these babies 1300mhz
did a full pass + 1 pass of test 5 in memtest

[Roger_D25]

Nice work above zsamz, do you remember what PL (performance level) you used and what voltage you were running, thanks?

[zsamz_]

Nice work above zsamz, do you remember what PL (performance level) you used and what voltage you were running, thanks?

i used pl9 2.06v didnt tweak they can do pl8
dfi board got so many settings i had forgotten i had everything on verry aggressive lol
1250mhz is enough for me i only need 11k bandwidth for my 24/7
but runnin em 1300mhz you feel the speed

[Commander_HK47]

i used pl9 2.06v didnt tweak they can do pl8
dfi board got so many settings i had forgotten i had everything on verry aggressive lol
1250mhz is enough for me i only need 11k bandwidth for my 24/7
but runnin em 1300mhz you feel the speed

if its not to much trouble i would like to know your sub timings and the values you used to get to that speed - thanks

[zsamz_]

if its not to much trouble i would like to know your sub timings and the values you used to get to that speed - thanks

1300mhz
in memset 5-5-5-15-56-9-14-11-3-8-5-6
memory pull is enabled so pl is like 8.2
that was just a test not tweaked bandwith suked

[Highgertz]

G.SKILL F2-9600 plus GA-EP45-DS5, 80-mm fan - 1534Mhz 5-9-9-25 2х2gb 2.6v

[neo mike]

Nice highgertz, lets see some everest scores on the run ??

[Highgertz]

neo mike
Only validation, recently checked GA-EP45-UD3.

[neo mike]

Your able to run these sticks at PL 5 ? i would like to see that, i find that hard to believe

[Commander_HK47]

i can get them to run at 1300(1299) with pl5 default timings at 2.133 volts

[neo mike]

wow very nice results, i cant get my xtreem teams to run a 5 at 1000mgz, impressive, that asus maxus board , what chipset is that ?

[Commander_HK47]

maximus formula converted to rampage formula with bios 410(have not updated to the newer 6xx bios yet). I also cleaned/remounted my north and south bridge coolers

[neo mike]

thats impressive board and memory, i know the g.skill 9600 rocks, had no idea could run that low pl, probaly has something to with your board to. The best i can get with my board and memory is pl 7.

[zsamz_]

thats impressive board and memory, i know the g.skill 9600 rocks, had no idea could run that low pl, probaly has something to with your board to. The best i can get with my board and memory is pl 7.

its the chips promos likin low pl
powerchips need higher pl

[clo007]

Has anyone picked up the ddr2-1100 version? They are literally half the price as these. I can't see myself spending $300 for a set of dd2-1200 but i can see myself spending $105 on ddr2-1100

[neo mike]

the 1100s wont overclock for nothing, i had them and rma them, best i could get was like 1170, and that was pushing hard

[clo007]

Thanks for the info. I guess if I was not looking to OC hard, then the $105 price would be ok for some 1100mhz ram?