G.SKILL F2-9600CL5D-4GBPI Sample testing

**guess2098** · 10-01-2008, 10:29 AM

Originally Posted by -n7-

Holy...

CAS 4 @ 500 MHz on 2x2 PSC =

I really want to find out what specific PSC IC in in this kit...& then who else is using it in cheaper ones.

Seems too good to be just higher binned stuff, i mean normally PSC would never get close to tCL 4 500 MHz, & tCL 5 600+ MHz is glorious.

do you ever read my review?

**GazC** · 10-01-2008, 10:41 AM

I'd like to see a SPD dump of this ram, I'd like to compare it to my 8800pi kit.

**zsamz_** · 10-01-2008, 02:09 PM

Originally Posted by GazC

I'd like to see a SPD dump of this ram, I'd like to compare it to my 8800pi kit.

this is in everest

Field Value
Memory Module Properties
Module Name G Skill F2-9600CL5-2GBPI
Serial Number None
Module Size 2 GB (2 ranks, 8 banks)
Module Type Unbuffered DIMM
Memory Type DDR2 SDRAM
Memory Speed DDR2-800 (400 MHz)
Module Width 64 bit
Module Voltage SSTL 1.8
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh

Memory Timings
@ 400 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 24-51-3-6-3-3 (RC-RFC-RRD-WR-WTR-RTP)
@ 266 MHz 4-4-4-10 (CL-RCD-RP-RAS) / 16-34-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)

Enhanced Performance Profile
Profile Name High Performance
Optimal Performance Profile Yes
Memory Speed DDR2-1066 (533 MHz)
Voltage 2.1 V
Memory Timings 5-5-5-15 (CL-RCD-RP-RAS)
Row Cycle Time (tRC) 48T
Command Rate (CR) 2T
Write Recovery Time (tWR) 13T

Memory Module Manufacturer
Company Name GSkill International Enterprise
Product Information http://www.gskill.com/indexen.html

**GazC** · 10-01-2008, 03:24 PM

Thanks, on the face of it they look similar. I cannot be sure because I'm using the free version of everest which doesn't let me see the SPD. I read mine using SPD tool.

**indeo** · 10-02-2008, 02:43 PM

One more complect of this wonderful RAM is delivered to Donetsk (Ukraine) to my friend highgertz
He need some technical time to register on XS. But he ask me present his results now for respected overclockers society

So..
For this time maximum validation friequency in Dual Chanell is 1400MHz 5-5-5-18, Intel® X48 (DFI LanParty LP LT X48-T2R)

http://s48.radikal.ru/i119/0810/7e/a065ab97566c.png

http://valid.x86-secret.com/show_oc.php?id=425457

Maximum 24/7 friequency make up 1350 MHz
http://radikal.ru/F/i003.radikal.ru/...826f2.jpg.html

Congradulation highgertz! We wait for further results

**Don_Dan** · 10-02-2008, 02:50 PM

Nice results, high-binned PSC is really awesome.

I hope he will post more results when his account has been approved!

**zsamz_** · 10-02-2008, 04:39 PM

anything over 1300 is not stable

**neo mike** · 10-02-2008, 09:10 PM

I talked to the g.skill rep today on the phone and said this memory is very hard to come by and refered me to this form, I WANT THIS STUFF REALLY BAD, WHERE IN THE WORLD CAN YOU BUY THIS KIT ?????? ANY G.SKILL REPS ON HERE, I HEARD THE PRICE IS $300 IM READY TO PAY, WHERE DO WE GET THIS STUFF.

**indeo** · 10-03-2008, 12:18 AM

Originally Posted by zsamz_

anything over 1300 is not stable

This mode (1350MHz) was tested by highgertz by MEMTEST and Intel© linpack.
No error was found - results you can see below
http://www.psp-devices.com/viewtopic...f178e02bcdcc63
http://forums.overclockers.ru/viewto...355538#5355538

unfortunately in russian.

**indeo** · 10-03-2008, 12:22 AM

Originally Posted by neo mike

I HEARD THE PRICE IS $300 IM READY TO PAY, WHERE DO WE GET THIS STUFF.

$300 is something less..
if you really interested by this RAM. May be I can help..

**zsamz_** · 10-03-2008, 03:10 AM

Originally Posted by indeo

This mode (1350MHz) was tested by highgertz by MEMTEST and Intel© linpack.
No error was found - results you can see below
http://www.psp-devices.com/viewtopic...f178e02bcdcc63
http://forums.overclockers.ru/viewto...355538#5355538

unfortunately in russian.

what voltage
i'll test on dfi x38 n see next week
maybe on dfi x38 i can do 1300 but i doubt it will go further 100% stable

anyone want my set i'm open to offers

**indeo** · 10-03-2008, 11:58 AM

what voltage?

All data on this screen. Now he plane to join to "DDR2-1400" club.. but he haz 2x2 GB...

1300MHz 1.93V 24/7 (memtest)

1350MHz 2.27V SuperPi 32M

1380MHz 2.4V SuperPi 1M 1380

**-n7-** · 10-04-2008, 05:39 AM

Originally Posted by indeo

All data on this screen. Now he plane to join to "DDR2-1400" club.. but he haz 2x2 GB...

1300MHz 1.93V 24/7 (memtest)

1350MHz 2.27V SuperPi 32M

1380MHz 2.4V SuperPi 1M 1380

Spectacular.

DDR2-1300 HCI stable = wow

**Jor3lBR** · 10-05-2008, 05:48 PM

Hi guys, I'm joining the G. Skill 9600 club and was wondering what are you guys doing to cool these babys? I dunno how I'm going to fit my XTC Cooler with that huge HS profile...

Anyone tried to remove them?

**zsamz_** · 10-05-2008, 08:34 PM

Originally Posted by Jor3lBR

Hi guys, I'm joining the G. Skill 9600 club and was wondering what are you guys doing to cool these babys? I dunno how I'm going to fit my XTC Cooler with that huge HS profile...

Anyone tried to remove them?

no need to really cool them as long as you not goin over 2.1v
but need good ventilation in case

**Jor3lBR** · 10-06-2008, 03:06 PM

Originally Posted by zsamz_

no need to really cool them as long as you not goin over 2.1v
but need good ventilation in case

Thanks for the info sam, yes our Dfi'S will always want less vdimm then other boards, I guess I'll put a cheap Antec SpotCool fan just in case instead of the OCZ XTC...

**high-gertz** · 10-07-2008, 07:37 AM

Hello, now I am with you

**high-gertz** · 10-07-2008, 07:41 AM

Ukraine, Donetsk

I bought his memory here, three weeks later I received them, one of the first http://www.ncixus.com/products/32241...-4GBPI/Others/

You see, my best result with a low voltage, fan, I use 80 mm

**high-gertz** · 10-07-2008, 07:48 AM

Type of system, the body is opent

**Leeghoofd** · 10-07-2008, 08:23 AM

High Gertz, this is an american forum , plz all posts in english !!!!

High gertz, diess is eines Amerikanischen forum, bitte NUR in englische sprache posten !!!

**high-gertz** · 10-07-2008, 08:56 AM

Originally Posted by Leeghoofd

High Gertz, this is an american forum , plz all posts in english !!!!

High gertz, diess is eines Amerikanischen forum, bitte NUR in englische sprache posten !!!

Sorry, wrong automatically, to correct

**Jor3lBR** · 10-07-2008, 10:17 AM

Originally Posted by high-gertz

Ukraine, Donetsk

I bought his memory here, three weeks later I received them, one of the first http://www.ncixus.com/products/32241...-4GBPI/Others/

You see, my best result with a low voltage, fan, I use 80 mm

great result with almost none vdimm

can you also share your memset values?

**high-gertz** · 10-07-2008, 10:33 AM

Jor3lBR
I will make pictures BIOS settings, and give more screen modified timing - can not continue to change.

reducing timing for 1300

To do this, change the settings in the BIOS, wait photo. Be sure to add fan.

As promised to adjust the BIOS DFI LT x48-T2R

http://www.sharemania.ru/0262010

**WaterFlex** · 10-08-2008, 01:29 AM

high-gertz
The fact is that 1.8-1.9V for these chips is the same thing like 2.1-2.2V for microns, especially for d9gkx.

**high-gertz** · 10-08-2008, 02:52 AM

WaterFlex
Yes, but not 2х2gg microns, and the PSC is much colder with these chips G. SKILL far ahead.

Thread: G.SKILL F2-9600CL5D-4GBPI Sample testing

Thread Tools

Search Thread

Rate This Thread

Display

g.skill

Bookmarks

Bookmarks

Posting Permissions