Stability at 9*500 and 4 GB was very easy just a ~ +0.03 at vNB .
Code:Processor: E8400 E0 Ai Overclock Tuner: Manual OC From CPU Level Up: Auto Ratio CMOS Setting: 9 FSB Frequency: 500 CPU Clock Skew: Delay 300ps (This Gave me more stability at the same vCore - - Thanks CryptiK) NB Clock Skew: Delay 400ps (This Gave me more stability at the same vNB - Thanks CryptiK) FSB Strap to North Bridge: 333 DRAM Frequency: DDR2-1000MHz DRAM CLK Skew on Channel A1: Auto DRAM CLK Skew on Channel A2: Auto DRAM CLK Skew on Channel B1: Auto DRAM CLK Skew on Channel B2: Auto DRAM Timing Control: Auto (For Now) DRAM Static Read Control: Disabled DRAM Read Training: Disabled MEM. OC Charger: Enabled Ai Clock Twister: Auto (For now) Ai Transaction Booster: Manual Common Performance Level: 10 Pull-in of CHA PH1: Disabled Pull-in of CHA PH2: Disabled Pull-in of CHA PH3: Disabled Pull-in of CHB PH1: Disabled Pull-in of CHB PH2: Disabled Pull-in of CHB PH3: Disabled PCIE Frequency: 100 CPU Voltage: 1.341 (Droops to 1.336 under Load) CPU PLL Voltage: 1.54 FSB Termination Voltage: 1.16625 DRAM Voltage: 1.9 North Bridge Voltage: 1.35 South Bridge 1.5 Voltage: 1.54 South Bridge 1.1 Voltage: 1.12 (Those because i have Raid) CPU GTL Reference (0): Auto CPU GTL Reference (1):-30mv (This means 0.64x anything else at tha 0.61x - 0.67x Range cause prime to stop) CPU GTL Reference (2): Auto CPU GTL Reference (3):-30mv NB GTL Reference: Auto DDR2 ChA Reference Voltage: Auto DDR2 ChB Reference Voltage: Auto North Bridge DDR Reference: Auto CPU Configuration: Ratio CMOS Setting: 9 C1E Support: Disabled Max CPUID Value Limit: Disabled Intel Virtualization Tech: Disabled CPU TM Function: Disabled Execute Disable Bit: Disabled Load-Line Calibration: Enabled CPU Spread Spectrum: Disabled PCIE Spread Spectrum: Disabled
Edit:
4h dual Prime with 4GB.
*My NB temps without a big fan and open window are 62+..still haven't put any washers...but i am 100% sure that the washers will improve my temps.
I will try for 8.5*533 now :P
Reply With Quote
Bookmarks