G.SKILL F2-9600CL5D-4GBPI Sample testing

Printable View

Show 100 post(s) from this thread on one page

10-01-2008, 10:29 AM
guess2098

Quote:

Originally Posted by -n7-

Holy...

CAS 4 @ 500 MHz on 2x2 PSC = :eek:

I really want to find out what specific PSC IC in in this kit...& then who else is using it in cheaper ones. ;)

Seems too good to be just higher binned stuff, i mean normally PSC would never get close to tCL 4 500 MHz, & tCL 5 600+ MHz is glorious.

do you ever read my review?
10-01-2008, 10:41 AM
GazC

I'd like to see a SPD dump of this ram, I'd like to compare it to my 8800pi kit.
10-01-2008, 02:09 PM
zsamz_

Quote:

Originally Posted by GazC

I'd like to see a SPD dump of this ram, I'd like to compare it to my 8800pi kit.

this is in everest

Field Value
Memory Module Properties
Module Name G Skill F2-9600CL5-2GBPI
Serial Number None
Module Size 2 GB (2 ranks, 8 banks)
Module Type Unbuffered DIMM
Memory Type DDR2 SDRAM
Memory Speed DDR2-800 (400 MHz)
Module Width 64 bit
Module Voltage SSTL 1.8
Error Detection Method None
Refresh Rate Reduced (7.8 us), Self-Refresh

Memory Timings
@ 400 MHz 5-5-5-15 (CL-RCD-RP-RAS) / 24-51-3-6-3-3 (RC-RFC-RRD-WR-WTR-RTP)
@ 266 MHz 4-4-4-10 (CL-RCD-RP-RAS) / 16-34-2-4-2-2 (RC-RFC-RRD-WR-WTR-RTP)

Enhanced Performance Profile
Profile Name High Performance
Optimal Performance Profile Yes
Memory Speed DDR2-1066 (533 MHz)
Voltage 2.1 V
Memory Timings 5-5-5-15 (CL-RCD-RP-RAS)
Row Cycle Time (tRC) 48T
Command Rate (CR) 2T
Write Recovery Time (tWR) 13T

Memory Module Manufacturer
Company Name GSkill International Enterprise
Product Information http://www.gskill.com/indexen.html
10-01-2008, 03:24 PM
GazC

Thanks, on the face of it they look similar. I cannot be sure because I'm using the free version of everest which doesn't let me see the SPD. I read mine using SPD tool.
10-02-2008, 02:43 PM
indeo

One more complect of this wonderful RAM is delivered to Donetsk (Ukraine) to my friend highgertz
He need some technical time to register on XS. But he ask me present his results now for respected overclockers society ;)

So..
For this time maximum validation friequency in Dual Chanell is 1400MHz 5-5-5-18, Intel® X48 (DFI LanParty LP LT X48-T2R)

http://s48.radikal.ru/i119/0810/7e/a065ab97566c.png

http://valid.x86-secret.com/show_oc.php?id=425457

Maximum 24/7 friequency make up 1350 MHz
http://radikal.ru/F/i003.radikal.ru/...826f2.jpg.html

Congradulation highgertz! We wait for further results ;)
10-02-2008, 02:50 PM
Don_Dan

Nice results, high-binned PSC is really awesome.

I hope he will post more results when his account has been approved!
10-02-2008, 04:39 PM
zsamz_

anything over 1300 is not stable;)
10-02-2008, 09:10 PM
neo mike

g.skill

I talked to the g.skill rep today on the phone and said this memory is very hard to come by and refered me to this form, I WANT THIS STUFF REALLY BAD, WHERE IN THE WORLD CAN YOU BUY THIS KIT ?????? ANY G.SKILL REPS ON HERE, I HEARD THE PRICE IS $300 IM READY TO PAY, WHERE DO WE GET THIS STUFF.
10-03-2008, 12:18 AM
indeo

Quote:

Originally Posted by zsamz_

anything over 1300 is not stable;)

This mode (1350MHz) was tested by highgertz by MEMTEST and Intel© linpack.
No error was found - results you can see below
http://www.psp-devices.com/viewtopic...f178e02bcdcc63
http://forums.overclockers.ru/viewto...355538#5355538

unfortunately in russian.
10-03-2008, 12:22 AM
indeo

Quote:

Originally Posted by neo mike

I HEARD THE PRICE IS $300 IM READY TO PAY, WHERE DO WE GET THIS STUFF.

$300 is something less..
if you really interested by this RAM. May be I can help..
10-03-2008, 03:10 AM
zsamz_

Quote:

Originally Posted by indeo

This mode (1350MHz) was tested by highgertz by MEMTEST and Intel© linpack.
No error was found - results you can see below
http://www.psp-devices.com/viewtopic...f178e02bcdcc63
http://forums.overclockers.ru/viewto...355538#5355538

unfortunately in russian.

what voltage
i'll test on dfi x38 n see next week
maybe on dfi x38 i can do 1300 but i doubt it will go further 100% stable

anyone want my set i'm open to offers
10-03-2008, 11:58 AM
indeo

Quote:

what voltage?

All data on this screen. Now he plane to join to "DDR2-1400" club.. but he haz 2x2 GB...

http://s49.radikal.ru/i123/0810/c6/34a93af29087t.jpg
1300MHz 1.93V 24/7 (memtest)

http://s42.radikal.ru/i097/0810/d4/082132353a89t.jpg
1350MHz 2.27V SuperPi 32M

http://i058.radikal.ru/0810/67/73eb1b80cdc6t.jpg
1380MHz 2.4V SuperPi 1M 1380
10-04-2008, 05:39 AM
-n7-

Quote:

Originally Posted by indeo

All data on this screen. Now he plane to join to "DDR2-1400" club.. but he haz 2x2 GB...

http://s49.radikal.ru/i123/0810/c6/34a93af29087t.jpg
1300MHz 1.93V 24/7 (memtest)

http://s42.radikal.ru/i097/0810/d4/082132353a89t.jpg
1350MHz 2.27V SuperPi 32M

http://i058.radikal.ru/0810/67/73eb1b80cdc6t.jpg
1380MHz 2.4V SuperPi 1M 1380

:eek: :clap:

Spectacular.

DDR2-1300 HCI stable = wow
10-05-2008, 05:48 PM
Jor3lBR

Hi guys, I'm joining the G. Skill 9600 club and was wondering what are you guys doing to cool these babys? I dunno how I'm going to fit my XTC Cooler with that huge HS profile...

Anyone tried to remove them?
10-05-2008, 08:34 PM
zsamz_

Quote:

Originally Posted by Jor3lBR

Hi guys, I'm joining the G. Skill 9600 club and was wondering what are you guys doing to cool these babys? I dunno how I'm going to fit my XTC Cooler with that huge HS profile...

Anyone tried to remove them?

no need to really cool them as long as you not goin over 2.1v
but need good ventilation in case
10-06-2008, 03:06 PM
Jor3lBR

Quote:

Originally Posted by zsamz_

no need to really cool them as long as you not goin over 2.1v
but need good ventilation in case

Thanks for the info sam, yes our Dfi'S will always want less vdimm then other boards, I guess I'll put a cheap Antec SpotCool fan just in case instead of the OCZ XTC...:up:
10-07-2008, 07:37 AM
high-gertz

Hello, now I am with you :toast:
10-07-2008, 07:41 AM
high-gertz

Ukraine, Donetsk :buddies:
I bought his memory here, three weeks later I received them, one of the first http://www.ncixus.com/products/32241...-4GBPI/Others/ :cheer2:
You see, my best result with a low voltage, fan, I use 80 mm
http://s56.radikal.ru/i153/0810/36/4bb7e7532a73t.jpg
10-07-2008, 07:48 AM
high-gertz

Type of system, the body is opent

http://s58.radikal.ru/i161/0810/19/7a6f8c047b2at.jpg
10-07-2008, 08:23 AM
Leeghoofd

High Gertz, this is an american forum , plz all posts in english !!!!

High gertz, diess is eines Amerikanischen forum, bitte NUR in englische sprache posten !!!
10-07-2008, 08:56 AM
high-gertz

Quote:

Originally Posted by Leeghoofd

High Gertz, this is an american forum , plz all posts in english !!!!

High gertz, diess is eines Amerikanischen forum, bitte NUR in englische sprache posten !!!

Sorry, wrong automatically, to correct
10-07-2008, 10:17 AM
Jor3lBR

Quote:

Originally Posted by high-gertz

Ukraine, Donetsk :buddies:
I bought his memory here, three weeks later I received them, one of the first http://www.ncixus.com/products/32241...-4GBPI/Others/ :cheer2:
You see, my best result with a low voltage, fan, I use 80 mm
http://s56.radikal.ru/i153/0810/36/4bb7e7532a73t.jpg

great result with almost none vdimm :clap:

can you also share your memset values?
10-07-2008, 10:33 AM
high-gertz

Jor3lBR
I will make pictures BIOS settings, and give more screen modified timing - can not continue to change.

reducing timing for 1300
http://i012.radikal.ru/0810/e5/eb6366dff061t.jpg

To do this, change the settings in the BIOS, wait photo. Be sure to add fan.

As promised to adjust the BIOS DFI LT x48-T2R

http://www.sharemania.ru/0262010
10-08-2008, 01:29 AM
WaterFlex

high-gertz
The fact is that 1.8-1.9V for these chips is the same thing like 2.1-2.2V for microns, especially for d9gkx.
10-08-2008, 02:52 AM
high-gertz

WaterFlex
Yes, but not 2х2gg microns, and the PSC is much colder with these chips G. SKILL far ahead.

Show 100 post(s) from this thread on one page