Ryzen 3800X @ 4.4Ghz
MSI X570 Unify
32GB G.Skill 3600Mhz CL14
Sapphire Nitro Vega 64
OCZ Gold 850W ZX Series
Thermaltake LV10
Guys,
Quick question, should i improve alittle more my overclock, here are my specs
AMD P2 955 3.8Ghz @ v1.41
8gb OCZ Plat 1600Dual channel Ganged
NB 2600 @ v1.3
Main: 900D - Prime 1000T - Asus Crosshair VI Extreme - R7 1700X @ 4.0ghz - RX Vega 64? - 32GB DDR4 3466 - 1TB 960 Pro -
--- XSPC AX360 x3 - HK IV Pro - HK RX480 - HK 200 D5 - BP Compression ---
HTPC: 250D - Prime 850T - Gigabyte G1 ITX - i7 6700K @ 4.5ghz - GTX 1080 Ti - 16GB 3200 - 1TB 960 Pro -
--- ST30 x UT60 - Kyros HF - KryoGraphics 1080 - HK100 DDC - Monsoon Compression ---
HV01: Define XL R2 - Prime 1200P - Asus Zenith Extreme - TR 1950X - RX580CF - 128GB DDR4 ECC - 512GB 960P - 4x 2TB RE
HV02: Node 804 - Prime 850T - SuperMicro X1SSH - E3-1230 v6 - Vega FE - 64GB ECC - 512GB 960 Pro - 4x 6TB Gold -
this mobo can run quad cf of 5770?
with drivers for win7 and vista, can i run quad CF of 5770?
Last edited by cesariuth; 11-26-2009 at 06:49 PM.
Ganges and unganged is memory...so why single cores......
I was not precise enough. When you are running applications that can utilize only one core then it is better to set your memory to "ganged" because you set there 128bit highway between CPU and RAM. In case of applications using multiple cores it is better to set it as "unganged" as cores will have access to memory through 2x64bit (as Phenoms has 2 memory controllers).
At least I understood it that way and correct me if i'm wrong
For your viewing pleasure
Seems i used the 5850s bit tooo much lol. Milkyway@home did this to my mobo lol rma'n now and yes cesariuth this run quad cf i run 5850*4 cf for milkyway@home
Coming Soon
Guys,
Im running ram in dual channel mode ganged at speeds of 1600Mhz the ram can handle 2000Mhz and OS im using is Vista64.
Ive just started overclocking, already
AMD Phen2 955 3.8Ghz @ v1.41
8gb OCZ Plat 2000Mhz @ 1600 Dual channel Ganged
NB 2600Mhz @ v1.3
What do you think?
I also have HIS Radeon 4870x2 + X-Fi Titanium Fatality soundcard, hopefully when Nvidea release 300 then i can make up my mind between NV300 or Ati5970.
Is my overclock ok, ram timings are 1T 9-11-11-24, i havent bothered with ram everything is left at auto, only thing i did was CPU and northbridge.
It looks good, but those timings... Ouch! Can't you get them closes to 7-8-7 at the very least?
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
i dont think that it was temp related because the system was not in a cabinet but open air. I think the stress of useing all 5850's for a long period of time did that, so maybe something to do with over voltage or maybe the cap was faulty from first.
Have sent the mobo for rma, the temps of the 5850 were under 80C at all time.
Coming Soon
Ryzen 3800X @ 4.4Ghz
MSI X570 Unify
32GB G.Skill 3600Mhz CL14
Sapphire Nitro Vega 64
OCZ Gold 850W ZX Series
Thermaltake LV10
Anyone else get hyper transport sync flood error whenever you raise cpu-nb volts past default?
It's been an issue for me since bios 1.71 but It could just be a coincidence. I'm not even sure cpu-nb has anything to do with it but I think it's the culprit. It seems to be a fairly common problem.
Main: 900D - Prime 1000T - Asus Crosshair VI Extreme - R7 1700X @ 4.0ghz - RX Vega 64? - 32GB DDR4 3466 - 1TB 960 Pro -
--- XSPC AX360 x3 - HK IV Pro - HK RX480 - HK 200 D5 - BP Compression ---
HTPC: 250D - Prime 850T - Gigabyte G1 ITX - i7 6700K @ 4.5ghz - GTX 1080 Ti - 16GB 3200 - 1TB 960 Pro -
--- ST30 x UT60 - Kyros HF - KryoGraphics 1080 - HK100 DDC - Monsoon Compression ---
HV01: Define XL R2 - Prime 1200P - Asus Zenith Extreme - TR 1950X - RX580CF - 128GB DDR4 ECC - 512GB 960P - 4x 2TB RE
HV02: Node 804 - Prime 850T - SuperMicro X1SSH - E3-1230 v6 - Vega FE - 64GB ECC - 512GB 960 Pro - 4x 6TB Gold -
it happened a few times yesterday when I was tweaking the cpunb
1090T | CH4F | HIS HD5850 | TT EvoBlue 750W | TT Spedo Advance | CM Aquagate Max | Samsung S27A350
Xtreme SUPERCOMPUTER
Nov 1 - Nov 8 Join Now!
Athlon64 3700+ KACAE 0605APAW @ 3455MHz 314x11 1.92v/Vapochill || Core 2 Duo E8500 Q807 @ 6060MHz 638x9.5 1.95v LN2 @ -120'c || Athlon64 FX-55 CABCE 0516WPMW @ 3916MHz 261x15 1.802v/LN2 @ -40c || DFI LP UT CFX3200-DR || DFI LP UT NF4 SLI-DR || DFI LP UT NF4 Ultra D || Sapphire X1950XT || 2x256MB Kingston HyperX BH-5 @ 290MHz 2-2-2-5 3.94v || 2x256MB G.Skill TCCD @ 350MHz 3-4-4-8 3.1v || 2x256MB Kingston HyperX BH-5 @ 294MHz 2-2-2-5 3.94v
I have the hyper transport sync flood error when i raise the nb but mostly when i bench all my 4 HD5770 cards in quad cf
The man with the littel Barebone!
And proud Crew of!!!
Octeamdenmark.com
Shuttle SX38P2Pro Barebone E8600cpu and HD4870X2 gfx and 2gig Crusial Ballistix PC8500 Cl5 and 2x150gig Raptor in raid 0 and 1x750 gig seagate
Msi 790FX-GD70 Mobo Amd 955-965 PHII cpus and 2gig Crucial value PC10600@800mhz 7-5-5-15 1T
And 4x500GB Seagate 7200.12 in raid0
4xHD5770 in CFQ.
[SIGPIC][/SIGPIC]
I am new to this board. Just an interesting observation. I have to flash to the 1.70 bios in order to have it work correctly with a 965 X4 black edition (C3 stepping). I tried 1.1 (shipped with the board) and 1.6b3, I can get into the bios setup but I wasn't able to boot from an USB or from an optical drive. They both hang after auto-detecting USB mass storage devices during POST. The LED shows the "b1" code and it just stays there. I have to use M-Flash to update the bios to 1.70 from an USB drive. Everything seems to work now. Does anyone encounter the same issue?
Intel Xeon X5650
ASUS Sabertooth X58
3 x 2 Gb G.Skill PC3-12800
MSI GTX 780Ti Gaming 3 Gb
Seasonic X850
Corsair 750D
Heatkiller 3.0/D5 & EK Top/Alphacool UT60 240
Some of the bios's had the HT syn flood issue...I would suggest you use CPU - NB Volts rather than the VDDC to raise voltages and then check....
I'm really like this board. I've found out that dominator gt's, which I rouged from my i7 setup, seem to be very light on the IMC. I can hit cas6 on these things with NB @ 3300mhz and CPU @ 4600mhz. Also cas6 with NB @ 2800mhz and CPU @ 4700mhz.
I also started getting the HT Sync Flood error all of a sudden, even though I've been running my system at 3.6GHz CPU, 2.4GHz NB, 2.4GHz HT, (all on stock Volts) for months without a problem.
It's either the 1.7 BIOS or a driver issue from my 5850 that has definitely been the cause, because I added the 5850 and updated the BIOS the same day.
TheBlueChanell, do you use a 5000 series ATI GPU too?
Is there anyone that is getting this error after updating to BIOS 1.7, but is not using the Radeon 5000 series graphics card?
EDIT: I did drop my RAM volts to 1.5V from the mobo's default 1.6V because my RAM is rated to use 1.5V, but I read that the RAM voltage being too low is a possible cause of this error. Goona try put it back up to Auto (1.6V) and see how it goes then report back.
Last edited by inferKNOX; 12-02-2009 at 04:16 AM.
RIG
CPU: AMD Phenom II X4 955BE @ 3.6GHz (stock V) w/ Prolimatech MegaShadow+Enermax Apollish (Silver)
M/B: MSI 790FX-GD70 NB & HT @ 2.4GHz (stock V)
RAM: A-DATA HY63I1B16K w/ HeatSinks
GPU: Sapphire 5850 1GB (Game Edition) @ 775/1125 (stock V)
HDD: 2 x Seagate Barracuda ST31000524AS
CSE: NZXT Apollo (Silver)
PSU: Ultra LSP650
MON: Samsung T260
K/B: Logitech G11 / Mse: Microsoft Sidewinder X8
Spk: Roccat KAVE 5.1 Headset
I think the flood issue is a bug in 1.7. I went back to 1.6 and haven't run into the same issue.
Intel® Core™ i7 920@200x21=4.2Ghz w/1.312v HT on
Asus P6TD Deluxe
H2O by Petra's Tech CoolKit Elite Rev.2 w/D-TEK FuZion V2
EVGA GTX 580
OCZ3P1600LV6GK 7-7-7-24-1T 6GB
OCZ Vertex 2 50Gb in Raid-0
Super Talent UltraDriveGX 128Gb
WD VelociRaptor 300
Corsair HX850W
Windows 7 Professional 64
AMD Phenom™ II X6 1090T BE @ 4131Mhz(243x17)
Asus Crosshair IV Formula
I was trying to OC past 4.2 and computer hung. So I switched it off and cleared cmos, but now it just gets stuck with code FF and then nothing happens. I have removed the battery and unplugged it for 15 minutes but that didn't work either. So have done it again and have left it for now. There is no display so I am wondering if there is anything else I can do. I see the blue cpu vid lights are all on, so looks like its stuck. What do u guys recommend
just gonna throw in my experience with bios ver 1.7 gave me tons of boot up problems @first, did a little tweaking got it to boot up in to win 7 but after bouit 20 secs after logging into user acct windows would lock up completely after it was done loading up. went back to ver 1.6 and all is fine now thank god!@
ffs msi if you see this fix 1.7 it is garbage!!!!!
-phenom II x4 955 BE 3.7 GHz
-msi 790fx-gd70 bios ver 1.6
-8 GB - OCZ platinum amd edition 1600 MHz @ 7-7-7-24-28-1T@1.72 v - OCZ3P1600LVAM4GK
-msi radeon 4890 oc edition 955/1150
-2x western digital caviar black 640GB
-kingwin mach 1 1220 w psu
-coolermaster cm690 nvidia edition (LOL)
Bookmarks