Hello Guys
For several days, I test the biostar TP45 HP with my few cpus and my caskade
Today i finaly test my cpus and i have broke WR i think (under Ripping.org)
My Configuration :
Code:E8200 Q745 / E8300 Q815 / Q9450 C741 / X3360 C803B / QX9650 C739 Biostar TP45 HP (Bios 0604/0710) AC82P45 SLB7Z L818A955 Crucial Pc8500 2x1go ou Single HIS HD4870 512mo Coolermaster Real Power 1000w Caskade 2 stages (-109°) évapo
My Setting for the C2D :
Code:BIOS SETUP O.N.E Over-Clocking Navigator (Manual OverClock) Intel(R) SpeedStep(tm) : Disabled Ratio CMOS Setting : ×6 or max multi CPU Frequency Setting : 590 Over Clock Retry Count : 1 FSB(Bsel) To NorthBridge Latch : 1333 DRAM Frequency : DDR2-1180 DDR2 Enhance Mode : Auto DRAM Timing Configuration DDR2 RCOMP Configuration : 2 or 4 Static tREAD Value : PL10/11 (13/15 for the Max Fsb) Configure DRAM Timing by SPD : Disabled (5-5-5-15) Clock Gen Configuration PCIE Frequency Setting : 101 CPU Clock Skew Control : 200 (G)MCH Clock Skew Control : Auto CPU Clock Driving Control : Auto Voltage Configuration CPU Voltage : ... DDR Voltage : +0.600v / 0.700v Chipset Voltage : +0.5v FSB Voltage : +0.35v CPU Core1 GTL Ref Voltage : 0.67*VTT CPU Core2 GTL Ref Voltage : 0.67*VTT MCH GTL Ref Voltage : Auto CPU PLL Voltage : 1.5v (more it's instable) Dimm : 2 & 4 (2 for the Single)
My Setting for the Quad :
Code:BIOS SETUP O.N.E Over-Clocking Navigator (Manual OverClock) Intel(R) SpeedStep(tm) : Disabled Ratio CMOS Setting : ×6 or max multi CPU Frequency Setting : 440 (for the X3360) & 490 (for the Q9450) Over Clock Retry Count : 1 FSB(Bsel) To NorthBridge Latch : 1333 DRAM Frequency : DDR2-880 or 980 DDR2 Enhance Mode : Disabled DRAM Timing Configuration DDR2 RCOMP Configuration : 2 or 4 Static tREAD Value : PL10/11 Configure DRAM Timing by SPD : Disabled (5-5-5-15) Clock Gen Configuration PCIE Frequency Setting : 101 CPU Clock Skew Control : Auto (G)MCH Clock Skew Control : Auto CPU Clock Driving Control : Auto Voltage Configuration CPU Voltage : ... DDR Voltage : +0.400v / 0.500v on 1:1 Chipset Voltage : Auto (or + 0.4/0.5v) same fsb FSB Voltage : Auto (or + 0.3/0.35v) same fsb CPU Core1 GTL Ref Voltage : 0.67*VTT CPU Core2 GTL Ref Voltage : 0.67*VTT MCH GTL Ref Voltage : Auto CPU PLL Voltage : 1.5v Dimm : 2 & 4 (2 for the Single)
WR E8200 :
http://valid.x86-secret.com/show_oc.php?id=391309
WR E8300 :
http://valid.x86-secret.com/show_oc.php?id=390485
& with the chiller under the NB :
http://valid.x86-secret.com/show_oc.php?id=391793
Spi 1mo : http://www.hwbot.org/result.do?resultId=754736
Pifast : http://www.hwbot.org/result.do?resultId=754740
Wprime32 :http://www.hwbot.org/result.do?resultId=711813
Wprime1024 : http://www.hwbot.org/result.do?resultId=754743
WR Q9450 :
http://valid.x86-secret.com/show_oc.php?id=384252
WR X3360 :
http://valid.x86-secret.com/show_oc.php?id=390346
Superpi 1mo : http://www.hwbot.org/result.do?resultId=754748
Wprime32 : http://www.hwbot.org/result.do?resultId=754750
Wprime1024 : http://www.hwbot.org/result.do?resultId=754751
And my QX9650 C739A769 at 1.86/1.88v of Cpuz (-105° evapo) :
http://valid.x86-secret.com/show_oc.php?id=391297
The newt Week end , i need test 2 QX9650 C1 and the Q9550 C1 too , maybe others good surprise !!
Only defects of the TP45 HP are vdroop on C2D/Quad (+0.04 / 0.06v) and performance in Superpi / pifast & Co (you must change the Mchbar / offset and make timmings tight to make good results)
Bookmarks