Fantastic Biobio TP45 HP : WR E8200/E8300/Q9450/X3360 ...

[boblemagnifique]

Hello Guys

For several days, I test the biostar TP45 HP with my few cpus and my caskade
Today i finaly test my cpus and i have broke WR i think (under Ripping.org)

My Configuration :

E8200 Q745 / E8300 Q815 / Q9450 C741 / X3360 C803B / QX9650 C739
Biostar TP45 HP (Bios 0604/0710) AC82P45 SLB7Z L818A955
Crucial Pc8500 2x1go ou Single
HIS HD4870 512mo
Coolermaster Real Power 1000w
Caskade 2 stages (-109°) évapo

My Setting for the C2D :

BIOS SETUP

O.N.E
Over-Clocking Navigator (Manual OverClock)
Intel(R) SpeedStep(tm) : Disabled
Ratio CMOS Setting : ×6 or max multi
CPU Frequency Setting : 590
Over Clock Retry Count : 1
FSB(Bsel) To NorthBridge Latch : 1333
DRAM Frequency : DDR2-1180
DDR2 Enhance Mode : Auto
DRAM Timing Configuration
DDR2 RCOMP Configuration : 2 or 4
Static tREAD Value : PL10/11 (13/15 for the Max Fsb)
Configure DRAM Timing by SPD : Disabled (5-5-5-15)

Clock Gen Configuration
PCIE Frequency Setting : 101
CPU Clock Skew Control : 200
(G)MCH Clock Skew Control : Auto
CPU Clock Driving Control : Auto

Voltage Configuration
CPU Voltage : ...
DDR Voltage : +0.600v / 0.700v 
Chipset Voltage : +0.5v 
FSB Voltage : +0.35v
CPU Core1 GTL Ref Voltage : 0.67*VTT
CPU Core2 GTL Ref Voltage : 0.67*VTT
MCH GTL Ref Voltage : Auto
CPU PLL Voltage : 1.5v (more it's instable)

Dimm : 2 & 4 (2 for the Single)

My Setting for the Quad :

BIOS SETUP

O.N.E
Over-Clocking Navigator (Manual OverClock)
Intel(R) SpeedStep(tm) : Disabled
Ratio CMOS Setting : ×6 or max multi
CPU Frequency Setting : 440 (for the X3360) & 490 (for the Q9450)
Over Clock Retry Count : 1
FSB(Bsel) To NorthBridge Latch : 1333
DRAM Frequency : DDR2-880 or 980
DDR2 Enhance Mode : Disabled

DRAM Timing Configuration
DDR2 RCOMP Configuration : 2 or 4
Static tREAD Value : PL10/11
Configure DRAM Timing by SPD : Disabled (5-5-5-15)

Clock Gen Configuration
PCIE Frequency Setting : 101
CPU Clock Skew Control : Auto
(G)MCH Clock Skew Control : Auto
CPU Clock Driving Control : Auto

Voltage Configuration
CPU Voltage : ...
DDR Voltage : +0.400v / 0.500v on 1:1
Chipset Voltage : Auto (or + 0.4/0.5v) same fsb
FSB Voltage :  Auto (or + 0.3/0.35v) same fsb
CPU Core1 GTL Ref Voltage : 0.67*VTT
CPU Core2 GTL Ref Voltage : 0.67*VTT
MCH GTL Ref Voltage : Auto
CPU PLL Voltage : 1.5v

Dimm : 2 & 4 (2 for the Single)

WR E8200 :



http://valid.x86-secret.com/show_oc.php?id=391309



WR E8300 :



http://valid.x86-secret.com/show_oc.php?id=390485

& with the chiller under the NB :



http://valid.x86-secret.com/show_oc.php?id=391793


Spi 1mo : http://www.hwbot.org/result.do?resultId=754736
Pifast : http://www.hwbot.org/result.do?resultId=754740
Wprime32 :http://www.hwbot.org/result.do?resultId=711813
Wprime1024 : http://www.hwbot.org/result.do?resultId=754743




WR Q9450 :





http://valid.x86-secret.com/show_oc.php?id=384252




WR X3360 :



http://valid.x86-secret.com/show_oc.php?id=390346

Superpi 1mo : http://www.hwbot.org/result.do?resultId=754748
Wprime32 : http://www.hwbot.org/result.do?resultId=754750
Wprime1024 : http://www.hwbot.org/result.do?resultId=754751


And my QX9650 C739A769 at 1.86/1.88v of Cpuz (-105° evapo) :



http://valid.x86-secret.com/show_oc.php?id=391297


The newt Week end , i need test 2 QX9650 C1 and the Q9550 C1 too , maybe others good surprise !!

Only defects of the TP45 HP are vdroop on C2D/Quad (+0.04 / 0.06v) and performance in Superpi / pifast & Co (you must change the Mchbar / offset and make timmings tight to make good results)